AS-01
Ultra compact fire suprresion
The AS-01 is the smallest AerooShield unit in the range, designed specifically for the smallest and tightest enclosed spaces.
Engineered to protect volumes up to 0.1 m³ (≈3.5 ft³), it is ideal for applications where space is extremely limited—such as machinery compartments, small automotive units, electrical panels, control boxes, and compact battery enclosures.
Despite its minimal size, AS-01 provides fully automatic, self-activating fire suppression, operating independently without external power, sensors, or control systems. Installed directly inside the protected space, it responds at the earliest stage of fire development, suppressing the fire at its source before damage can spread
More Information
Use & Operation
A single unit is designed to protect a volume of up to 0.1 cubic meters (m³) / 3.5 cubic ft.
The AS01 aerosol generator must remain in a closed (sealed) state prior to activation to ensure reliable and safe performance.
Ensure there are no obstructions within 100 mm directly in front of the device’s activation nozzles. This clear space is critical for proper discharge and system effectiveness.
Do not install the device in air exhaust areas or beneath the protected zone, as these positions may disrupt aerosol distribution and reduce suppression efficiency.
Upon activation, the device will start automatically. Do not touch the unit until it has fully cooled down, as high surface temperatures may cause burns.
After discharge, promptly ventilate the area by opening windows or doors to allow aerosol particles to disperse.
Installation
For optimal performance, the unit should be mounted in one of two configurations:
-
Ceiling Installation: Position the unit directly above the anticipated point of fire initiation, ensuring that the activation points are oriented downward toward the protected area.
-
Wall Installation: Mount the unit on the side wall of the enclosure, with the activation points facing directly toward the equipment or components being protected.
-
The orientation of the activation points is critical for effective fire suppression and must be directed toward the fire risk zone.
For enclosed spaces exceeding 0.1 m³, multiple units may be required. In such cases, refer to the product's technical specifications for detailed guidance on unit quantity, spacing, and installation layout to ensure full coverage and compliance with safety standards.
Storage
The product should be stored in a cool dry place with good ventilation and exposure to sunlight should be avoided.
-
It is strictly forbidden to store this product near a heat source
-
It is forbidden to apply pressure to the product
-
It is forbidden to use it after the expiry date
Product Data
-
Product name: AEROO SHIELD 1 - AS01
-
Item number: AS01
-
Discharge time: ≤5 seconds
-
Agent mass: 5 gr
-
Extinguishing capacity: 0.1 Cubic Meter / 3.5 Cubic feet
-
Working temperature: -30~70 ºC / -22F – 158F
-
Activation is triggered at a temperature of 170 ± 10 ºC / 338F or upon direct contact with an open flame
-
Lifetime: 5 years
-
Size:
-
Length: 100 mm
-
Width: 17 mm
-
Height: 10 mm
-
