AS-03
Ultra compact fire suprresion
AS-03 is designed for cabinet- and rack-sized enclosed spaces where protection beyond ultra-compact volumes is required. It is well suited for electrical cabinets, control panels, battery enclosures, server and data racks, automation equipment, machinery housings, and enclosed technical systems such as professional 3D printers.
Installed directly within the protected space, AS-03 operates fully automatically without external power or sensors and may be used as a standalone unit or interconnected with other AerooShield generators using a pyrotechnic activation cord to protect larger or distributed enclosures.
More Information
Use & Operational guide
Operating Conditions and Safety Guidelines – AS03 Aerosol Fire Extinguishing System
If the unit reaches its expiration date without being activated, it must be removed and returned to the supplier in accordance with manufacturer disposal procedures.
The AS03 aerosol generator must remain in a closed (sealed) state prior to activation to ensure reliable and safe performance.
Ensure there are no obstructions within 100 mm directly in front of the device’s activation nozzles. This clear space is critical for proper discharge and system effectiveness.
Do not install the device in air exhaust areas or beneath the protected zone, as these positions may disrupt aerosol distribution and reduce suppression efficiency.
Upon activation, the device will start automatically. Do not touch the unit until it has fully cooled down, as high surface temperatures may cause burns.
After discharge, promptly ventilate the area by opening windows or doors to allow aerosol particles to disperse.
Installation
A single unit is designed to protect a volume of up to 0.3 cubic meters (m³) / 10.5 cubic ft.
For optimal performance, the unit should be mounted in one of two configurations:
-
Ceiling Installation: Position the unit directly above the anticipated point of fire initiation, ensuring that the activation points are oriented downward toward the protected area.
-
Wall Installation: Mount the unit on the side wall of the enclosure, with the activation points facing directly toward the equipment or components being protected.
The orientation of the activation points is critical for effective fire suppression and must be directed toward the fire risk zone. For enclosed spaces exceeding 0.3 m³, multiple units may be required. In such cases, refer to the product's technical specifications for detailed guidance on unit quantity, spacing, and installation layout to ensure full coverage and compliance with safety standards.
Storage
The product should be stored in a cool dry place with good ventilation and exposure to sunlight should be avoided.
-
It is strictly forbidden to store this product near a heat source
-
It is forbidden to apply pressure to the product
-
It is forbidden to use it after the expiry date
Product Data
-
Product name: AEROO SHIELD 03 - AS-03
-
Item number: AS-03
-
Discharge time: ≤5 seconds
-
Agent mass: 12 gr
-
Extinguishing capacity: 0.3 Cubic Meter / 10.5 Cubic feet
-
Working temperature: -30~70 ºC / -22F – 158F
-
Activation is triggered at a temperature of 170 ± 10 ºC / 338F or upon direct contact with an open flame
-
Lifetime: 5 years
-
Size:
-
Length: 87 mm
-
Width: 54 mm
-
Height: 20 mm
-
